News
News Center
Maintenance method of powder equipment
Release time:
2024-06-20
1. During the period of using the equipment, each shift should refuel the main shaft of the equipment. Together, the oil injection time should not be too short or too long. During the oil injection period, the operators should also hold the amount of oil high, not too much or too little, otherwise it will have a certain impact on the equipment.
Since the powder equipment is mainly broken stones, materials near the characteristics of stones can also be broken, but non-broken materials such as metals cannot be broken. If in the equipment broken stone period, non broken into the crushing cavity, then it will form a serious damage to the equipment, will form a certain damage to the grinding roller and grinding ring, intermediate hanger, etc., affecting the normal operation of the equipment.
Generally speaking, the air volume control valve is above the air inlet pipe of the fan. Under normal circumstances, the air volume is required to be adjusted to the direction during the normal operation of the powder equipment. According to the user's demand for product fineness and output value to adjust the air volume, through the adjustment valve, you can control the powder equipment dust, until the transferred equipment will not produce dust stop.
Latest News
2024-05-08
Get a Free Consultancy
Committed to providing energy-saving, intelligent, clean, safe and efficient high quality powder equipment production line for the powder industry.
2-2, Sanli Road, Muping District, Yantai City, Shandong Province
Phone +86 176 1618 8999
WhatsApp +852 5634 4039
Copyright© Yantai Wanheng